How do I restore Windows 2003 server I am having some problem with the software and want to restore my server in previous state. Can anybody helpme and provide me the solute for this. Restore Windows Server 2003 with AOMEI Backupper If the system refuses to start, we can create a bootable disk with AOMEI Backupper. Backup is the base of restore. Therefore, if there is no ready system image backup, create one with AOMEI Backupper firstly by linking the very first chaining.
Windows Server 2003 is a Microsoft operating system, which is usually able to meet different commercial demands However, it disturb lots of people when they encounter various kinds of data loss problems on Windows Server 2003 operating system. You may lose data on Windows Server 2003 due to following reasons:
- Accidentally deleted files by pressing Shift + Delete keys or Delete key
- Format disk drive by mistake on Windows Server 2003
- Windows 2003 operating system is crashed due to virus infection, software conflict or any other reasons
- Unexpected power outage or power off
- Hard drive turns to RAW file system in Windows 2003
- Data got lost after reinstalling Windows Server 2003 operating system
- RAID disk failure on Server 2003
- More other reasons
Do you know how to resolve the problem if you unfortunately run into the similar data loss situation? Do not worry! This article will introduce solution for Windows Server 2003 data recovery in all data loss situations.
Windows Server 2003 Data Recovery Software Download
Truthfully, you need to rely on data recovery software to recover lost data on Windows Server 2003. iCare Data Recovery Pro is a data recovery program that is able to work on Windows 2003 Server operating system. You can free download this software and use it to restore any file such as images, videos, music, documents, etc from Windows 2003 RAID volume or basic hard disk drive in various data loss situations. This data recovery software provides read-only solution for data recovery on Server 2003, so it will not lead any further data loss or damage on your computer.
Steps to Recover Files on Windows 2003
Preparation: Free download and install iCare Data Recovery on Windows Server 2003. Please pay attention not to install the software on the drive where data got lost. Then, you can launch the software and follow the steps below to restore lost files on Windows 2003:
Step1. You can select a proper scan mode after entering the main interface of the software.
Step2. Choose the disk drive where data got lost and then you just need to patiently when the software is scanning the selected drive to search lost files.
Step3. After scanning, you can preview some files like images and documents. Then, you can select all lost files and save them to another drive.
Server 2003 RAID Volume Data Recovery
Server 2003 is usually used in small or medium enterprises, where need to store and manage a number of data. RAID drive is a good choice for many enterprises to store a large amount of data, but is there anything you can do to get back the lost file if all data stored on the RAID volume in Windows Server 2003 operating system? Well, you might lose some or even all data from a RAID volume on Server 2003 due to many reasons like mistaken deletion, formatting, RAID hard drive failure, RAID array rebuilding, RAID volume virus infection, RAID hard drive bad sectors, etc. If you meet the similar problem at any time, you can use iCare Data Recovery to restore files from the RAID volume. This data recovery supports RAID 0 data recovery, RAID 1 data recovery, RAID 2 data recovery, RAID 3 data recovery, RIAD 4 data recovery, RAID 5 data recovery, RAID 6 data recovery and RAID 10 data recovery. By using this data recovery software, you do not need rebuild the array. Even if the RAID array is not accessible, this data recovery software allows you to extract all previous inaccessible data without rebuilding the array.
Windows Server 2003 Dynamic Disk Failure
Almost all Windows operating systems support basic hard disk drive, but only a few Windows operating systems support dynamic disk. You can easily convert a basic hard drive into a dynamic disk, but you should know that it is almost impossible to convert a dynamic disk back to a basic hard drive unless you can recreate the dynamic or rely on some professional tools. When you read or write data on dynamic disk on Windows Serve r 2003, the dynamic disk might be failed or corrupted due to many reasons. Usually, it might cause dynamic disk failure on Windows Server 2003 due to virus infection, improper operation, bad sectors, etc. If you are unable to read data from dynamic disk on Windows Server 2003 due to disk failure, iCare Data Recovery provides an easy solution for data recovery on dynamic disk.
Windows Server 2003 RAID 5 Failure
RAID 5 is an array commonly used in Windows Server OS, which provides a good solution for data storage. However, sometimes, you might meet RAID 5 disk failure problem on Windows Server 2003. Usually, Windows Server 2003 RAID 5 disk might fail due to following reasons:
1. Hard disk drive in RAID 5 array is corrupted
As you know, RAID 5 arrays is created by at least 3 hard disk drives. If more than one hard drive is corrupted or hard drive contains bad sectors in RAID 5 volume, it might cause RAID array failure problem.
2. RAID 5 volume is attacked by virus
Virus infection would cause various kinds of problems. RAID 5 volume might fail if it is infected with virus.
3. RAID 5 array fails after adding new hard drive to it
Sometimes, you may find that RAID 5 stops working normally after adding a new hard drive to the array. If so, you had better check if the new added hard drive is compatible with the RAID 5 array. You need to install a hard drive that is able to be compatible with the RAID array and the existing hard drive. Otherwise, the RAID 5 volume might keep failing.
Windows 2003 Blue Screen of Death
Since Windows Server 2003 operating system is developed for Server, it has default settings for some hardware. Therefore, people who install Windows Server 2003 on personal computer might meet some problem. Windows blue screen of death is one possible problem that you might meet on your PC which runs Windows Server 2003 OS. Generally speaking, PC usually shows blue screen of death due to conflict or incompatibility after installing some hardware driver. In addition, your computer may report blue screen of death and shuts down automatically because the operating system is not compatible with some software. What is more, a computer will also tell blue screen of death due to virus infection. Anyway, Windows Server 2003 blue screen of death is a problem that would be caused due to various reasons. You need to make it clear the reasons why your computer shows the error message so as to fix the problem efficiently.
About Windows Server 2003
Windows Server 2003 is a Server operating system which was developed by Microsoft. Microsoft developed Windows Server 2003 operating system based on Windows XP, so Server 2003 has some of Windows XP features. Windows Server 2003 was released on March 28, 2003, which has many improvements than Windows 2000. Microsoft stopped supports for Windows Server 2003 on July 14, 2015. Windows 2003 has several editions including Windows Server 2003 Web Edition, Windows Server 2003 Standard Edition and Windows Server 2003 Enterprise Edition. Windows Server 2003 R2 is the updated edition of Windows 2003, which was released on December 6, 2005.
Windows Server 2003 Antivirus
Windows Server 2003 is usually used in different kinds of enterprises, on which you may store a large amount of data. Therefore, it is necessary and important to install antivirus software on Windows 2003 to protect all data from being attacked by virus, spyware or Trojan, etc. There are various kinds of antivirus programs for Windows Server 2003, but you only need to install one antivirus on your computer. The antivirus software may fail to prevent virus infection to your data if you installed two or more antivirus programs because they may have conflict. After installing a proper anti-virus program, you should regularly update it to ensure that it can always work normally.
Virus infection probably causes many problems on Windows Server 2003. For example:
>> Windows system crash
>> Cannot boot Windows Server 2003 normally
>> Data becomes corrupted and inaccessible on disk of Server 2003
>> Personal information leaks out
Windows 2003 Upgrade
Although Windows 2003 is still available, you are taking a big risk using Windows Server 2003 because Microsoft has stopped providing security updates and other service for Server 2003. You can upgrade Server 2003 to Windows Server 2008 for the sake of system security and data security. You should pay attention to following points for Server 2003 upgrade in case of unexpected problem:
1. You had better make a backup for important data in advance. If any problem occurs during system upgrading, it probably results in huge data loss.
2. You should make sure that all programs, data, hardware and services are compatible with the upgraded Server system. Especially, you should prevent the problems caused due to incompatibility issue during Windows Server 2003 upgrading.
3. An accident usually occurs when you believe that everything works perfectly. Probably, you may face unexpected problem in system upgrading system. You should calm down when any issue occurs.
Fix Stop Error on Windows Server 2003
Windows Server 2003 cannot work anymore when it reports stop error message? Even worse, the error enables you to write or read data normally on Windows 2003. Although Windows Server has better performance than personal Windows operating system, it still runs into different kinds of problems due to many reasons. When Windows Server 2003 shows stop error message like STOP 0x0000008E, STOP 0xC0000005, STOP 0x00000024, etc, probably it has system failure. The Stop error message and parameter values may show differently in different situations, but the similar point is that the Server system would stop working normally when you receive such kind of stop error message. When you encounter such kind of problem, you may download and install hotfix to resolve the issue.
Windows 2003 Startup Problems
You may run into startup problem on Windows Server 2003, in which situation the computer might fail to start. Startup failure problem can by caused by various kinds of reasons such as virus infection, system crash, system misconfiguration, system file corruption, disk volume corruption, hardware failure, hard drive failure, software conflict, registry corruption, bad driver, boot sector corruption, etc.
Symptom of Startup Issue in Server 2003
Here are some symptoms of startup issue when your computer cannot boot under Windows Server 2003 operating system:
1. Windows Server 2003 startup screen hangs there – This problem usually results from bad drivers, registry corruption or virus attack.
2. Windows 2003 shows black screen when you attempt to boot your computer – This issue occurs when NTLDR is missing, there is invalid partition table, a disk read error occurred, etc.
3. System reports that one ore more service cannot start – If you receive such an alert message, probably it has issues like registry corruption, system misconfiguration, application incompatibility and more.
Resolution:
When you are not able to boot Windows 2003 normally, you can try following methods to resolve the problem:
1. When starting your computer, you can try to boot Windows 2003 from safe mode. After entering Safe Mode, you can select 'last known good configuration' to boot your computer.
2. If you have backed up the system in advance, you can perform system restore so as to restore the Windows 2003 operating system to previous state when it still works perfectly.
3. You can also repair the problem with professional tool, or you can contact Microsoft Customer Service to ask for help.
Server 2003 Reboot Suddenly
Windows 2003 computer reboot suddenly when you are handing some important documents or data? Sudden reboot of computer might corrupt the files stored on your computer or cause system corruption.
Possible reasons for sudden reboot of Server 2003
>> System is corrupted or crashed
>> Hardware failure
>> Virus infection
>> Software conflict
>> Incompatibility problem
>> More other unknown reasons
Symptoms
When Windows Server 2003 reboots all of a sudden, you probably find following symptoms:
1. One common symptom is that your computer shows blue screen of death. It will pop up a window showing stop error message, so blue screen is also called stop screen. Your computer reboots suddenly without giving you any time to store unsaved data after showing the error message.
2. Windows 2003 may reboot without any warning message when you run an application or do something else.
3. Sometimes, your computer may reboot under Windows 2003 system but the problem is that computer stops responding after entering Server 2003 boot screen.
How to solve reboot problem on Server 2003?
The solutions for the problem fixing vary, depending on the different causes that lead Windows 2003 to reboot suddenly. Usually, you can try following methods:
1. If the problem occurs after installing any new program, you had better uninstall the new added program.
2. You can restore the system back to previous state when you made a system restore point.
3. You can start your computer from Safe Mode to fix the problem.
4. Remove the new added hardware which may be incompatible with the Server system.
Windows 2003 Related Editions
Windows Server 2003 R2
Windows Server 2003 R2 is the updated version of Windows Server 2003. It was released December 6, 2005. Windows Server 2003 R2 provides a more efficient way to mange and control access for local and remote resources.
Windows Small Business Server 2003 SBS
Windows Small Business Server 2003, namely SBS 2003, is usually used in small business. SBS 2003 is very easy to handle.
If you meet similar problem on Server 2003 R2 or SBS 2003, you can use the same methods mentioned above to resolve the problem.
Related Articles
Free Unlimited Data Recovery Software > Howto > Windows Recovery > Windows Server 2003 Data Recovery
This step-by-step article describes how to use the Backup feature to back up and restore data on your Windows Server 2003-based computer. This article is intended for users who backup and restore data, and it includes information about how to back up and restore the system configuration and local registry.
To perform the procedures in this article, you must be logged on as a member of the Administrators group or the Backup Operators group.
Backing Up the Server
You can manually back up data or use the Backup Wizard, which is included in the Backup feature. You can back up the whole contents of the server, selected portions of the server, or the system state data (the system configuration information).
To Back Up Selected Files or Folders
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. Click the Backup tab.
4. On the Job menu, click New.
5. Expand the drive or folder that contains the items that you want to back up. Click to select the check boxes next to the files, folders, or drives that you want to back up.
6. In the Backup destination box, specify the destination for the new job. To do so, do one of the following:
• If you want to back up files and folders to a file, click File.
• If you want to back up to tape, click a tape device. Now mostly we are back up to external hard disk.
NOTE: If a tape device or external hard disk is not connected to your computer, File is the only backup media type that is available in the Backup destination box.
7. In the Backup media or file name box, do one of the following:
o If you are backing up to a file, specify a path and file name for the backup (.bkf) file. Or, click Browse, specify a file name and location where you want to save the file, and then click Save.
o If you are backing up to tape, click the tape that you want to use.
8. On the Tools menu, click Options. Specify any additional backup options that you want on the appropriate tabs of the Options page. Click OK.
9. Click Start Backup.
10. If you want to set advanced backup options, such as data verification or hardware compressions, click Advanced. Specify the options that you want, and then click OK.
11. Review the settings on the Backup Job Information page. Specify whether you want this backup to replace the information that is already present on the destination media, or add this backup to the existing information.
12. Click Start Backup.
To Back Up the System State (Including Registry Settings)
To back up the system state (including the registry hives system, software, security, the Security Accounts Manager (SAM), and the default user (but not HKEY_CURRENT_USER)), follow these steps:
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. Click the Backup tab.
4. On the Job menu, click New.
5. Click to select the System State check box.
6. Click to select the check boxes next to any other files, folders, or drives that you want to back up.
7. In the Backup destination box, specify the destination for the new job. To do so, do one of the following:
• If you want to back up files and folders to a file, click File.
• If you want to back up to tape, click a tape device.
NOTE: If a tape device is not connected to your computer, File is the only backup media type that is available in the Backup destination box.
8. In the Backup media or file name box, do one of the following:
• If you are backing up to a file, specify a path and file name for the backup (.bkf) file. Or, click Browse, specify a file name and location where you want to save the file, and then click Save.
• If you are backing up to tape, click the tape that you want to use.
9. On the Tools menu, click Options. Specify any additional backup options that you want on the appropriate tabs of the Options page. Click OK.
10. Click Start Backup.
11. If you want to set advanced backup options, such as data verification or hardware compressions, click Advanced. Specify the options that you want, and then click OK.
12. Review the settings on the Backup Job Information page. Specify whether you want this backup to replace the information that is already present on the destination media, or add this backup to the existing information.
13. Click Start Backup.
To Schedule a Backup for a Later Time or Date
You may want to run a backup operation when there is low system usage. However, such times may be late at night or on weekends. You can schedule backup jobs to run on a particular day and time.
NOTE: To schedule a backup operation, the Task Scheduler service must be running.
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. Click the Backup tab.
4. On the Job menu, click New.
5. Expand the drive or folder that contains the items that you want to back up. Click to select the check boxes next to the files, folders, or drives that you want to back up.
6. In the Backup destination box, specify the destination for the new job. To do so, do one of the following:
• If you want to back up files and folders to a file, click File.
• If you want to back up to tape, click a tape device.
NOTE: If a tape device is not connected to your computer, File is the only backup media type that is available in the Backup destination box.
7. In the Backup media or file name box, do one of the following:
• If you are backing up to a file, specify a path and file name for the backup (.bkf) file. Or, click Browse, specify a file name and location where you want to save the file, and then click Save.
• If you are backing up to tape, click the tape that you want to use.
8. On the Tools menu, click Options. Specify any additional backup options that you want on the appropriate tabs of the Options page. Click OK.
9. Click Start Backup.
10. Click Schedule.
If a message prompts you to save your current backup selections, click OK. On the Save As page that appears, specify a name and location where you want to save the backup, and then click Save.
11. In the Job name box, type a name for the scheduled backup job, and then click Properties.
12. Click the Schedule tab. In the Schedule Task box, click how frequently you want the backup job to run, and then in the Start time box, specify a time when you want the backup to run, and then click OK.
13. On the Set Account Information page that appears, type a user name and password of the user whom you want to run the scheduled backup for, and then click OK.
14. Click OK.
The backup job that you scheduled appears on the calendar on the Schedule Jobs tab. The scheduled backup job automatically starts at the time and data that you specified.
15. Close the Backup Utility page.
To Back Up Data by Using the Backup Wizard
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. On the Welcome tab, click Backup Wizard (Advanced). The Backup Wizard starts. Click Next.
4. Specify what you want to back up, and then click Next.
5. If you selected Back up selected files, drives, or network data in step 4, expand the drive or folder that contains the items that you want to back up, click to select the check boxes next to the drive, folder, or file that you want to back up, and then click Next.
6. Specify the backup type, destination, and name in the appropriate boxes, and then click Next.
NOTE: If a tape drive is not connected to your computer, File is the only backup media type that is available in the Select the backup type box.
7. Review the settings that appear on the Completing the Backup Wizard page. If you want to specify advanced backup options, click Advanced, specify the options that you want, and then click OK.
8. Click Finish.
Restoring Data to the Server
If a data loss occurs, you can restore your backup data manually or by using the Restore Wizard, which is included in the Backup feature.
To Restore Selected Files from a File or Tape
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. Click the Restore and Manage Media tab.
4. Click the media that you want to restore, and then click to select the check boxes next to the drives, folders, or files that you want to restore.
5. In the Restore file to box, specify the location where you want to restore the files by doing one of the following:
- If you want to restore the files or folders to the same location in which they were when you backed up the data, click Original location, and then go to step 7.
- If you want to restore the files or folders to a new location, click Alternate location.
This option preserves the folder structure of the backed up data.
- If you want to restore the files and folders to a single location, click Single folder.
6. If you selected Alternate location or Single folder, type the location in which you want the data to be restored, or click Browse and select the location, and then click OK.
7. On the Tools menu, click Options. Click the Restore tab, specify the restore option that you want, and then click OK.
8. Click Start Restore.
9. On the Confirm Restore page that appears, click Advanced if you want to set advanced restore options, and then click OK.
10. Click OK to start the restore operation.
To Restore the System State Data (Including Registry Information)
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. Click the Restore and Manage Media tab.
4. In the Items to restore box, expand the media that you want to restore, and then click to select the System State check box.
5. Click to select the check boxes next to any other drives, folders, or files that you want to restore.
6. In the Restore file to box, specify the location where you want to restore the files by doing one of the following:
• If you want to restore the files or folders to the same location in which they were when you backed up the data, click Original location, and then go to step 8.
• If you want to restore the files or folders to a new location, click Alternate location.
This option preserves the folder structure of the backed up data.
• If you want to restore the files and folders to a single location, click Single folder.
NOTE: If you do not designate an alternate location for the restored data, the restore operation erases the current system state data and replaces it with the information that you are restoring.
7. If you selected Alternate location or Single folder, type the location in which you want the data to be restored, or click Browse and select the location.
8. Click Start Restore.
9. On the Confirm Restore page that appears, click Advanced if you want to set advanced restore options, and then click OK.
10. Click OK to start the restore operation.
How To Recover Windows 8.1
To Restore Backed Up Data by Using the Restore Wizard
1. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup. The Backup or Restore Wizard starts.
2. Click Advanced Mode.
3. On the Welcome tab, click Restore Wizard (Advanced). The Restore Wizard starts. Click Next.
4. In the Items to restore box, expand the media that you want to restore, click to select the check boxes next to the drives, folders, or files that you want to restore, and then click Next.
5. Review the settings that appear on the Completing the Restore Wizard page. If you want to specify advanced backup options, click Advanced, specify the options that you want, and then click OK.
6. Click Finish.